Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Tucson Homeowners
Chimney repair in Tucson is what we do, and it’s all we do. Since 2018 we’ve handled the repairs most sweep-only operators refer out – relining, crown work, flashing, masonry – in-house, with no subcontracting and no handoff to a second contractor mid-project. A cracked crown, a rusted cap or a flue that’s lost its ceramic coating doesn’t fix itself, and it doesn’t stay small in a house that sees real heat for months on end.
The liner matters as much as the cleaning. We work with DuraFlex flexible liner systems and HeatShield ceramic resurfacing because those are the products professionals specify, not whatever ships from a warehouse. We handle the repair, not just the report. For a free estimate, call (855) 750-1719. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Chimney Cap Installation
Chimney Cap Installation is the single most cost-effective repair we sell, and it’s the one most Tucson rooftops over 15 years old are missing. A cap is a metal or stainless hood on legs that sits over the flue, letting smoke out and keeping rain, birds, squirrels and debris in. If your flue is open to the sky, everything the desert blows around ends up inside it. We size the cap to the flue, not to the masonry, so it can be removed cleanly later. Typical costs are listed in the cost section below, and the written estimate sets the final price.
Why the Cap Sits on Legs
A cap that bolts flat to the crown seals the top but leaves the flue breathing through gaps that rust shut. Legs keep airflow open on all sides, which is what the flue needs between fires. It also means we can lift the cap off for a sweep rather than cutting it free.
Mesh and Spark Screens
The mesh size does two jobs: it keeps out birds and squirrels, and it traps embers on the way up. We fit stainless mesh that won’t sag apart after one summer on a hot roof. Copperfield and Famco make the sizes we use most, and both hold up to sun without looking beat up after a few years.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is what you need when the cap is there but past saving – rusted through, bent off its legs, or so covered in creosote that the mesh has closed up. A clogged cap doesn’t just block animals; it cuts draft and sends smoke back into the room. We pull the old cap, check the flue top, and set a new one matched to the opening. We’ll tell you plainly if the existing cap can be cleaned and reset instead, because a cap that works doesn’t need replacing. Costs are covered below; an estimate is free.
Rust, Wind and Bent Legs
Monsoon wind and years of sun do the damage here more than rain does. Look for legs that have bent inward, or a cap that’s sitting crooked. A crooked cap funnels water straight onto the crown instead of shedding it off the sides.
When Cleaning Beats Replacing
If the metal is sound and the mesh is intact, a cap just needs the creosote brushed off it. We test that during the sweep, not on your roof with a clipboard and a sales pitch. Nothing gets swapped without you seeing why.
Chimney Liner Installation
Chimney Liner Installation is the repair that actually protects the house, because the liner is the pipe that carries combustion gases up and out. When the clay tiles are cracked, spalling, or missing joints, gases can escape into the wall cavity instead of the outdoors. We install DuraFlex flexible stainless liners, which feed down a damaged flue without a full tear-out, and we can resurface with HeatShield ceramic where the flue structure is still sound. Repair and relining are handled in-house. HeatShield is a coated ceramic resurfacing that rebuilds the flue surface from the inside.
What the Camera Shows First
No liner gets recommended off a guess. We run a camera down the flue and show you the footage, so the cracks and offsets are yours to see before anyone quotes a number. If the flue is sound, we say so and recommend nothing.
Insulated Versus Bare Liner
An insulated liner holds heat in the flue better, which matters for wood stoves and inserts running hard. A bare liner suits some gas appliances fine. We match the liner to the appliance you actually burn, not to the biggest ticket.
Chimney Flashing Repair
Chimney Flashing Repair fixes the metal collar where the chimney meets the roof, and it’s the repair most often misdiagnosed as a roof leak. Flashing is stepped into the shingles and folded up the chimney sides to shed water. When it pulls loose, rusts through or was never installed with a proper counter-flashing, water tracks down the masonry and shows up as a stain on a ceiling nowhere near the chimney. We reset or replace the flashing and seal it correctly. That job is quoted on the estimate, and the written figure is the price.
Tracing a Leak to the Right Place
A ceiling stain gets blamed on the roof, the flashing or the crown, and the wrong answer costs money twice. We check all three from the roof and inside the attic where we can reach it. Then we fix the one that’s actually leaking.
Counter-Flashing and Sealant
Sealant alone is a temporary patch that fails in the heat. We cut a proper reglet into the masonry and set counter-flashing so water can’t get behind it. That’s the difference between a repair and a callback.
Chimney Crown Repair
Chimney Crown Repair deals with the concrete slab on top of the chimney, which sheds water away from the flue and the masonry below it. When the crown cracks, water gets in, and in a desert climate the damage shows up fast: loose bricks, crumbling mortar, and rusted flashing at the base. Small cracks get sealed. A crown that’s broken through gets rebuilt, or we bond a new over-crown where the structure allows it. We check the crown on every sweep and tell you if it can wait. The written estimate sets the price.
Hairline Cracks and Big Breaks
Hairline cracks are common on older crowns and often harmless if they haven’t widened. A crack you can fit a coin into is a different story and usually means the slab has moved. We tell you which one you have.
Rebuilding Without a Tear-Off
Where the masonry below is still solid, an over-crown with a proper slope saves tearing the whole top apart. It’s a smaller job with a smaller bill. When the whole crown is failing, we rebuild it rather than patch over rubble.
Chimney Repair Companies
Chimney Repair Companies in Tucson range from dedicated chimney and venting specialists to general handymen who added a brush to the truck, and the difference shows on the estimate. A sweep-only operator can clean a flue but sends relining and masonry work out to someone else. That’s a second appointment, a second markup and no one accountable for the whole job. We’re a specialist, not a side service: sweep, repair and restoration all happen under one roof. All repair and restoration is handled directly, never subcontracted. The estimate is free, and the written price is what you pay.
Questions That Sort Them Out
Ask whether the liner work is done in-house or referred out. Ask to see camera footage before anyone recommends a reline. Ask which supply brands the company actually installs, because that tells you what they’ve trained on.
Red Flags on a Quote
A quote for thousands of liner work with no camera evidence is a red flag. So is a price given before anyone looked up the flue. We won’t recommend work we can’t show you a reason for.
Chimney Masonry Repair
Chimney Masonry Repair restores the brick and mortar above the roof, the part that takes the full sun and everything the monsoon throws at it. Spalling brick, crumbling mortar joints and a chimney that leans are the usual signs. In a dry climate mortar dries and crumbles rather than freezing apart, so repointing is often what the chimney really needs. We cut out the failed joints and repoint with compatible mortar, and we replace spalled brick where it’s gone too far. We give you an honest read on what can wait. The written estimate sets your final price.
Repointing Versus Rebuilding
Repointing saves a chimney when the bricks themselves are still sound but the joints between them have failed. A rebuild only makes sense when a course of brick is crumbling or the stack has shifted. We’ll say which one your chimney actually needs.
Brick Spalling and Sun Damage
Spalling shows as brick faces flaking off and piling up on the roof or in the yard. Left alone, water gets into the brick body and the damage spreads. Catching it early keeps a small repair small.
Brands We Service
We work with DuraFlex liner systems and know where they wear, how they sit in an offset flue, and which appliance they pair best with. We’re qualified on HeatShield ceramic resurfacing, which lets a flue be rebuilt from the inside instead of torn down, and we use Gelco and Olympia Chimney products where their strengths fit the job. These are the professional supply lines, not big-box substitutes, and they’re the materials specified by certified chimney professionals.
We also carry Famco and Copperfield components for caps and the smaller parts that make a repair last. All of it is installed by us, on our own jobs, with no subcontractor in between. Whether you have DuraFlex or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A blocked flue, a clogged cap or a draft problem causes this, and it will keep happening on every fire until it’s found. Don’t keep burning and hoping the draft picks up.
- White or dark staining on the masonry. Stains on the outside of the chimney mean water or creosote is getting somewhere it shouldn’t. It’s a visible symptom that’s easy to diagnose on the roof.
- Crumbling mortar or loose bricks. If pieces are coming off the stack, the structure has weakened. This is the point to get it looked at, before the repair gets bigger.
- A rusted or missing cap. An open flue lets in rain, animals and debris. It’s a small job now and a bigger one once the nest or the water damage is in.
- Smoke smell or a headache with the fire on. Stop using the fireplace and get it inspected. A venting problem is a gas problem, and it isn’t something to test by burning again.
Our Process, Step by Step
- 1
Call and we book it. Call (855) 750-1719. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The estimate is free.
- 2
We look before we quote. We go up on the roof, check the cap, crown and flashing, and run a camera down the flue where it’s needed. We don’t quote repair work before we’ve seen the problem.
- 3
You see the footage. We show you the camera footage and explain what each issue is and why it matters. If some of it can wait, we tell you that too, in plain words.
- 4
You get a written estimate. One flat price per job, set before the work starts. Materials are named – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco or Copperfield, whichever fits the job.
- 5
We do the work and check it. Sweep, repair and restoration happen in-house, no subcontractor stepping in mid-project. When we finish, we test the draft and confirm smoke goes where it should.
How Much Does Chimney Repair Cost in Tucson?
Chimney repair in Tucson is quoted per job by a written estimate, and the range is wide because the jobs are. A cracked crown reseal is a small bill. A full reline is not. We don’t post a flat number because every house is different, and a number given before anyone looks is a guess. The estimate is free and the written figure is the price. The best way to avoid overpaying is to ask for camera evidence before you agree to liner work, and to ask whether the company does the repair in-house or refers it out. A specialist who handles the repair, not just the report, has no reason to sell you work the flue doesn’t need.
Our Service Area Near Tucson
We work across Tucson and the surrounding communities – Catalina Foothills, Drexel Heights, Flowing Wells, Tanque Verde, Rincon Valley, Vail, Valencia West, Corona de Tucson, the Tucson Mountains and South Tucson. Summit too. When you need a chimney sweep, we can book you in and be out to you without sending you to a second contractor. For chimney services in Tucson and the neighborhoods around it, one call reaches the whole crew.
Serving Tucson, AZ – Our Local Coverage Area
We serve Tucson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Tucson
Chimney repair is fixing the parts of the chimney that carry smoke and gases safely out of the house: the liner, crown, cap, flashing and masonry. It’s different from a sweep, which removes creosote and blockages. A repair fixes what’s broken so the chimney vents correctly. If you want the cleaning side, that’s what we do too.
Most repairs take a few hours; a full reline or a rebuild can take longer and some jobs run across more than one visit. We give you a time on the estimate once we’ve seen the flue. If it’s a small fix and the chimney’s sound, we’ll tell you so. If a bigger job is needed, we put the timeline in writing before we start.
Chimney repair is priced per job by a written estimate, and the final price is whatever the written estimate sets. We don’t quote a number before we’ve seen the flue. Camera evidence comes first, then you get a flat estimate. Call (855) 750-1719 for an exact quote – estimates are free.
Yes. We install DuraFlex flexible liner systems and we’re qualified for HeatShield ceramic flue resurfacing. Both are professional supply brands specified by chimney professionals, not hardware-store substitutes. If your chimney already has one of these in it, we can inspect, clean and repair around it.
We answer 24/7, and fast dispatch is 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening – never a voicemail. The estimate is free and the price is set per job by the written estimate. Call (855) 750-1719 and we’ll get you on the schedule.
We stand behind the work and the materials we install, and the warranty terms are written on your estimate. That includes the liner or resurfacing job, so you know exactly what’s covered. Call (855) 750-1719 and ask before we book, and we’ll go over the terms with you.
Clear the hearth and give us space to work, and make sure someone is home to let the technician in. If you have pets, put them somewhere safe while we’re on the roof. Tell us about any previous liner work or repairs when you book, so we bring the right parts. We answer 24/7 at (855) 750-1719.
Schedule Your Chimney Repair Service in Tucson Today
A sound chimney is one call away. Call (855) 750-1719. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Free, no-obligation estimate, camera inspection and photo report included, and a written price before anyone starts. If the repair can wait, we’ll say so.
Written by Ray Yates, Owner at Tucson Chimney Sweep, serving Tucson since 2018.